The Illuminating Engineering Society of North America (IESNA) Testing Procedures Committee (TPC) conducted its semiannual meeting in Ft. Lauderdale from…
In this video, we discuss how you can optimize the equipment in your lab to improve measurement repeatability and reduce time to market for your devices.
To achieve accurate test data, LEDs, laser diodes, and other devices must be tested at their max capacity for the required amount of time. Watch this video to learn how to avoid equipment with hidden limitations.
Vektrex products will be shown in the Rapitech booth during this show. Stop by to see demonstrations of the Performance Series with SpecWin Pro software.
Application Note: Laser Diode Power Supply Transient Response Under Typical Laser Diode Fault Conditions
When a laser fails, it can suffer catastrophic damage if the power supply does not have a failsafe. This application note documents tests conducted with three different types of power supplies to determine how they respond to a typical failure scenario.
Video: Compare Powering 25W COB with Vektrex Performance Series Current Source and Keithley Source Meter
Don’t compromise. Use a current source that can provide the power you need to test your device. You’re selling your devices for full power operation so you should be able to test them at full power. Watch the video to learn why.
Vektrex products will be shown in the BOB Enterprise Inc. booth during this show. Stop by the booth to learn more about Vektrex products for LM-80, reliability, and burn-in.
Vektrex products will be shown in the Rapitech booth (booth B1032) during this show. Stop by the booth for demonstrations of the unmatched power, accuracy, and repeatability of Performance Series Current Sources.
In this video, Jeff Hulett gives a demonstration of the power, accuracy, and repeatability provided by the SpikeSafe™ Performance Series Current Source.